Hydraulic hose

The Multispiral No-Skive hose range contains all of the market typical 4 and 6 spiral hose types including 4SP/4SH, SAE 100R12, R13 and R15 SAE.
Parker has a full range of unique spiral hoses No-Skive which do not require removing the outer cover or inner tube before crimping the fittings on to the hose. This unique functionality is achieved through specially designed bite-type fittings that guarantee a reliable connection.
As a complimentary product to the Multispiral range Parker also designed the 372 hose. This 3 wire braided hose has a higher specification and a greater flexibility than the typical 4SP hose.
All of the MS products in the range are also available upon request with nitrile inner tubes that offer higher chemical resistance to aggressive fluids and are ideal for use with Bioactive media.

Nominal pressure: up to 445 Bar
Temperature range: -40°C to +121°C.
Sizes: from -6 to -32.

Parker also manufactures a wide range of multipurpose hoses for different applications. For example, PYTHON (hoses for hot water and light chemicals) and OILPRESS (high-efficiency flame retardant hoses) deliver the high quality and reliability guaranteed by Parker.

Sizes: for inner tube diameter from 6 to 100 mm.
Nominal pressure: from 1.0 MPa to 10.0MPa.

These hoses are designed for suction and delivery of petroleum products, fuels and mineral oils, for hydraulic systems and petrol pumps, loading and discharge of tankers. Parker's oil and fuel hoses have a high resistance to petroleum based fluids. To withstand suction, these hoses have a robust design with a strong textile reinforcement and an embedded steel wire helix. The cover is made of an oil- and weather-resistant material, to provide a good resistance to severe industrial use.
Parker's oil and fuel hoses meet the latest international standards (such as EN 1360, SAE J 200, EN ISO 7840 Al, EN 12115, etc) and, where necessary, they have been approved by Bureau of Standards, TUEV, and other organizations.

Sizes: for inner tube diameter from 5 to 150 mm.
Nominal pressure: from 0.4 MPa to 2.0MPa.

Wide range of hoses for domestic and industrial appliances or for transport of LPG, non-combustible and welding gases. Welding applications can be hazardous and safety is most important.
Gas and welding hoses are manufactured according to the latest European standard EN 559.
Where necessary, Parker's gas hoses have been approved by qualified organizations (IMQ, DVGW, etc.).

Sizes: for inner tube diameter from 4 to 51 mm.
Nominal pressure: from 1.0 MPa to 5.0MPa.

Hot water and steam hoses are made of special rubber compounds formulated to resist the effect of steam ageing.
Parker's steam hoses fulfil the latest international standards.
Special textile and steel wire reinforcement provide high reliability at high pressures and temperatures.
The hose cover is high-resistant to temperature, ageing and abrasion.

Sizes: for inner tube diameter from 7 to 120 mm.
Nominal pressure: from 0.3 MPa to 1.7MPa.

In applications where even higher abrasion resistance than the Parker Compact hoses already offer is required, the TC (Tough Cover) and the ST (Super Tough) hoses offer extreme abrasion resistance.
Specifying a Parker hose with ST cover offers an abrasion resistance level 450 times greater than that of a standard rubber cover according to ISO 6945 metal to hose abrasion test results. The same test results prove Parker's TC cover to be 80 times more abrasion resistant than the standard rubber cover.
These hose series give increased service life, lower maintenance costs and eliminate the need for costly hose protectors such as guards or sleeves. As with all Parker hoses the cover does not need to be removed before assembling the Parkrimp fittings.

Nominal pressure: up to 400 Bar
Temperature range: -40°C to +100°C.
Sizes: from -4 to -16.

For the good reasons Parker Hannifin is a world-wide leader with the Push-Lok System. Push-Lok hoses and fittings are worldwide approved and available with a variety of connections in DIN, BSP, SAE, JIC and ORFS in brass, steel and stainless steel.
The Push-Lok System includes 9 hose types for a multiplicity of applications. During many years of system development three different hose constructions were created:
• 6 rubber hose constructions
• 2 thermoplastic hose constructions
• 1 hybrid hose construction
The hoses are available with 6 different colours, which could be used to sign different kind of fluids.
Please find below the basic features of the Push-Lok System:
Easy assembly - no tools and clamps required
Low assembly costs
• High functional safety with a safety factor of 4
• Hose + fitting = one manufacturer
• High-class hose types
Customer oriented hose developments are the basis for high-class hoses.

Nominal pressure: up to 24 Bar
Temperature range: -40°C to +150°C.
Sizes: from -4 to -16.

The vulcanized rubber Compact twin hoses have a high abrasion resistant cover and are extremely flexible with a constant working pressure of 210 Bar.
These hoses are ideal for applications where extremely small bending radii are required such as on a fork lift truck, hose reels for mobile cranes or lifting platforms.

Nominal pressure: up to 210 Bar.
Temperature range: -40°C to +80°C.
Sizes: from -4 to -10.
Tension: 3–5 %

A range of hoses which are the optimum solution for air brake systems, diesel engine cooling systems as well as air conditioning applications.
Parker is offering for this hose types a special range of fittings (Series 26) as a No-Skive system.
Some of the available hose types include high performance of fire resistance construction.
The hose constructions are dependent on working pressure and contain different layers of textile or steel wires and synthetic rubber material for tube and cover.

Nominal pressure: up to 207 Bar
Temperature range: -50°C to +150°C.
Sizes: from -4 to -32.

The medium pressure hose product range contains:
the Elite Compact hoses exceeding EN specifications;
the No-Skive hoses according to specifications EN 853, SAE 100 R1AT and SAE100 R16.
Whenever small bend radii together with high-pressure and good hose oil compatibility are required, the Parker Elite Compact hoses are the best choice.
The proven functionality of the Elite Compact hoses and the respective Parker 46 Series fittings offers increased reliability and safety of a system. The Elite Compact range contains both single and twin-line rubber hoses meeting or exceeding the EN857 specification.
Parker Compact hoses and 46 Series fittings can be crimped on Parker's Karrykrimp 2 crimping equipment offering a complete system solution for your hydraulic system.
Construction: abrasion- and chemical-resistant synthetic rubber cover, one or two layers of high tensile steel wires and high quality Nitrile (NBR) inner tubes.

Nominal pressure: up to 42,5 MPa
Temperature range: -50°C to +100°C.
Sizes: from -4 to -20.

Specific application conditions are fulfilled with the use of multispiral hoses with the internal or external fittings.
With the wide range of ParLock hoses and fittings, Parker meets market requirements.
The ParLock System offers: a full range of skive/interlock multispiral hoses conform to ISO 3862-1 (4SP to R15). Hose and fitting combination gives the performance exceeding ISO/EN requirements. The best guarantee of hose and fitting compatibility is one manufacturer. The tests conducted show the reliable operation:
– in high flex-impulse applications,
– in high vibration applications.
Construction: synthetic rubber tube and cover, 4 to 6 layers of high tensile steel wire braiding.

Nominal pressure: up to 44,5 MPa
Temperature range: -40°C to +100°C.
Sizes: from -6 to -32.

Specifications: ISO 3862 EN 856 4SP/ 4SH / R12 / R13 / R15S.

Parker ITR offers a wide range of PVC/PU hoses for different applications: water, agricultural spray, foodstuff, oil, fuel, and cable protection.
PU hoses have a high ageing and abrasion resistance, high flexibility and a good stress resistance.